23rd September 2016
Written by James Napier UK Sales Manager
Most softwood timber products should be supplied pressure treated to give the product the longest possible ‘in service’ life, but what is pressure treatment?
What is Pressure Treatment?
Pressure treatment is essentially the process of impregnating timber with a chemical preservative designed to protect the timber against fungal attack, rot and decay. These preservatives can be categorised into three broad groups: water-borne, oil borne and light organic solvent, however the application process is generally the same for each as outlined in the diagram below:
Pressure treated timbers are split into several different ‘classes’ which are created by using a different solution strength during the treatment cycle. It is important to make sure you pick the correct class for your specific requirements to ensure long lasting performance. As a very brief overview the main classes are:
Use Class 1 – Internal timbers that will permanently be dry.
Use Class 2 – Internal timbers that have a risk of getting wet.
Use Class 3 – External timbers used above ground and exposed to the weather.
Use Class 4 – External timbers in direct contact with the ground and/or fresh water.
Depending on the class you select you will have a different projected ‘in service life’, this basically means the expected life-span of the timber if it is installed correctly. For example, most decking will be treated to Use Class 3 and come with a 15 year in service life.
Pressure treatment will generally leave the timber with a green or brown colouring depending on the specific chemical being applied, however over time the timber with weather to a silver/grey appearance regardless of its original colouring or treatment. This means that any timber used, regardless of whether you use multiple treatment systems will eventually be indistinguishable.
End Grain Preservative
The chemical preservative will only penetrate the top layers of the timber, meaning there is a section in the centre of any board that won’t be impregnated. This is absolutely fine if you are installing the timber without any cutting or drilling, however if you do intend to break the treated timber it is essential to apply an end grain preservative to keep the treatment ‘sealed’.
The chemical compounds used in pressure treated timber are constantly being developed to ensure they are safe for both the users and the environment around them.